페이지 정보
60MHz(OSC-1060) 조회 857
옵션표
본문
| Real Time Analog Oscilloscopes |
ITEM | OSC-1060 | ||||
|---|---|---|---|---|---|
CRT | Configuration and Useful Screen | 6-Inch Recrangular Screen with InterNal Graticule : 8 X 10 div(1 div-1cm) Marking for Measurement of Rise Time 2 mm Subdivisions Along The Central Axis. | |||
Acceletating Potenrial | +10KV Approx(Ref. Cathode) | ||||
Phosphor | P31(Standard) | ||||
Focussing | Possible(With Auto-Fous Corrnetion Circuit) | ||||
Trace Rotation | Provided | ||||
Intensity Control | Provided | ||||
2-AXIS INPUT (INRENSITY MODUALATION | Input Signal | Positive Going Signal Decreases intensity +5 Vp-p or More Signal Cases Noriceable Modulation at Normal Intensity Settings | |||
Bandwith | DC to 2MHz(-3 dB) | ||||
Coupling | DC | ||||
Input Impedance | 20㏀ -30㏀ Typical | ||||
Maximum Input Voltage | 30V(DC-PEAK AC) | ||||
VERTICAL DEFLECTION | Bandwith (-3dB) | DC Coupled | DC to 60MHz Normal DC to 10MHz Magnifed | ||
AC Coupled | 10Hz to 60MHz Normal 10Hz to 10MHz Magnifed | ||||
| Modes | CH1, CH2, DUAL, ADD, ALT, CHOP | ||||
| Defiection Factor | 5mV/div to 5V/div in 11 Calibrated Steps of A 1-2-5 Sequence Continuously Variable Between Steps at Least 1:2.5 | ||||
| Accuracy | Normal : ±3%, Magnified, ±5% | ||||
| Input Impedance | 1㏁ in Parallel with Approx, 30pF | ||||
| Maximum Input Voltage | Direct 400V(DC+Peak AC), with Probe : Refer to Probe Specification | ||||
| Input Coupling | DC - GND - AC | ||||
| Rise time | 5.8ns or Less(35ns or Less : X 5MAG) | ||||
| CH1 Out | 20mV/div into 50Ω : DC to 10MHz(-3dB) | ||||
| Polarity Inversion | CH2 Only | ||||
| HORIZONTAL DEFLECTION | Display Modes | Normal, X-Y, x10, Variables | |||
| Time Base | 0.1㎲/div to 0.2s/div in 20 Calibrated Steps, 1,2-5 Sequence Un-calibrate Continuous Control Between Steps at Least 1:2.5 | ||||
| Sweep Magnification | 10 Times (Maximum Sweep Rate : 10ns/div) | ||||
| Accuracy | ±3%, ±5%(0'C to 40'C), Additional Error for Magnified ±2% | ||||
TRIGGER SYSTEM | Modes | Auto, Normal, TV-V, TV-H | |||
| source | Ch1, VERT(CH1, CH2)EXT, LINE | ||||
| Coupling | AC | ||||
| Slope | + or - | ||||
| Sencitivity and Frequency Auto(30Hz or More), Nom | AREA | DC to 10MHz | 10MHz to 60MHz | ||
| INT(VERT) | 0.5 div(2.0) | 1.5div(3.0) | |||
| EXT | 0.2 Vp-p | 0.6 Vp-p | |||
| TV-V, TV-H | At Least 1 div or 1.0 Vp-p | ||||
| External Trigger Input Impedance | 1㏁(in Parallel with Approx, 25pF | ||||
| Max Input Voltage | 400V(DC+Peak AC) | ||||
X-Y OPERATION | X-Axis, Y-Axis | (Same as CH1 Except for The Following) Deflection Factor : Same as That of CH1 Accuracy : ±5% Frequency Reaponse : DC to 500KHz(-3dB) | |||
| X-Y Phase Difference | 3' or Less (AtDC to 50 KHz) | ||||
| CALIBRATOR | Prebe Adjustment | 1KHz(±20%) Frequency, 0.5V(±10%)Square Wave Duty Ratio : 40~60% | |||
| POWER SUPPLY | Voltage Range | Voltage Range | Fise(250V) | ||
| UL198G | IEC127 | ||||
| 115(98~125V)/AC | F1.25 AL | F1.25 AL | |||
| 230(198~250V)/AC | F0.63 AL | F0.63 AL | |||
| Frequency | 50/60 Hz | ||||
| Power Consumption | Max 4.5W | ||||
| PHYSICAL CHARCTERISTICS | Weight | 8.2Kg | |||
| Size | 370mm(W) x 137mm(H) x 416mm(D) | ||||
| EBVIRONMENTAL CHARACTERISTICS | Temperature | Temperature Range fot Rated Operation : + 10'C to +35'C(+50"F to +95'F) Max Ambient Operting Temperature : 0'C to 40'C(+32'F to +104'F) Max Storage Temperature : -20'C to +70'C(-4'F to +158'F) | |||
| Humidity | Range for Rated Operation : 45% to 85% RH/Max Ambient Operating Humidity : 35% To 85 %RH | ||||
| OTHERS | Accessories | Operator's Manual :1 Spara fuse : 1 | |||
| Supplied | Power cord : 1 Test Probe(option) : 2 | ||||