ITEM | OSC-1030 |
|---|
CRT | Configuration and Useful Screen | 6-Inch Recrangular Screen with InterNal Graticule : 8 X 10 div(1 div-1cm)
Marking for Measurement of Rise Time 2 mm Subdivisions Along The Central Axis. |
Acceletating Potenrial | +1.9KV Approx(Ref. Carhode) |
Phosphor | P31(Standard) |
Focussing | Possible(With Auto-Fous Corrnetion Circuit) |
Trace Rotation | Provided |
Intensity Control | Provided |
2-AXIS INPUT (INRENSITY MODUALATION | Input Signal | Positive Going Signal Decreases intensity +5 Vp-p or More Signal Cases Noriceable Modulation at Normal Intensity Settings |
Bandwith | DC to 2MHz(-3 dB) |
Coupling | DC |
Input Impedance | 20㏀ -30㏀ Typical |
Maximum Input Voltage | 30V(DC-PEAK AC) |
VERTICAL DEFLECTION | Bandwith
(-3dB) | DC Coupled | DC to 30MHz Normal
DC to 10MHz Magnifed |
AC Coupled | 10Hz to 30MHz Normal
10Hz to 10MHz Magnifed |
| Modes | CH1, CH2, DUAL, ADD, ALT, CHOP |
| Defiection Factor | 5mV/div to 5V/div in 11 Calibrated Steps of A 1-2-5 Sequence
Continuously Variable Between Steps at Least 1:2.5 |
| Accuracy | Normal : ±3%, Magnified, ±5% |
| Input Impedance | 1㏁ in Parallel with Approx, 30pF |
| Maximum Input Voltage | Direct 400V(DC+Peak AC), with Probe : Refer to Probe Specification |
| Input Coupling | DC - GND - AC |
| Rise time | 10ns or Less(23.5ns or Less : X 5MAG) |
| CH1 Out | 20mV/div into 50Ω : DC to 10MHz(-3dB) |
| Polarity Inversion | CH2 Only |
| HORIZONTAL DEFLECTION | Display Modes | Normal, X-Y, x10, Variables |
| Time Base | 0.1㎲/div to 0.2s/div in 20 Calibrated Steps, 1,2-5 Sequence
Un-calibrate Continuous Control Between Steps at Least 1:2.5 |
| Sweep Magnification | 10 Times (Maximum Sweep Rate : 10ns/div) |
| Accuracy | ±3%, ±5%(0'C to 40'C), Additional Error for Magnified ±2% |
TRIGGER
SYSTEM | Modes | Auto, Normal, TV-V, TV-H |
| source | Ch1, VERT(CH1, CH2)EXT, LINE |
| Coupling | AC |
| Slope | + or - |
| Sencitivity and Frequency Auto(30Hz or More), Nom | AREA | 2MHz to 20MHz | 21MHz to 35MHz |
| INT(VERT) | 1.5 div(3.0) | 2.0div |
| EXT | 0.6 Vp-p
| 0.6 Vp-p |
| TV-V, TV-H | At Least 1 div or 1.0 Vp-p |
| External Trigger Input Impedance | 1㏁(in Parallel with Approx, 25pF |
| Max Input Voltage | 400V(DC+Peak AC) |
X-Y OPERATION | X-Axis, Y-Axis | (Same as CH1 Except for The Following) Deflection Factor : Same as That of CH1 Accuracy : ±5%
Frequency Reaponse : DC to 500KHz(-3dB) |
| X-Y Phase Difference | 3' or Less (AtDC to 50 KHz) |
| CALIBRATOR | Prebe Adjustment | 1KHz(±20%) Frequency, 0.5V(±10%)Square Wave Duty Ratio : 40~60% |
| POWER SUPPLY | Voltage Range | Voltage Range | Fise(250V) |
| UL198G | IEC127 |
| 115(98~125V)/AC | F1.25 AL | F1.25 AL |
| 230(198~250V)/AC | F0.63 AL | F0.63 AL |
| Frequency | 50/60 Hz |
| Power Consumption | Max 4.5W |
| PHYSICAL CHARCTERISTICS | Weight | 8.2Kg |
| Size | 370mm(W) x 137mm(H) x 416mm(D) |
| EBVIRONMENTAL CHARACTERISTICS | Temperature | Temperature Range fot Rated Operation : + 10'C to +35'C(+50"F to +95'F)
Max Ambient Operting Temperature : 0'C to 40'C(+32'F to +104'F)
Max Storage Temperature : -20'C to +70'C(-4'F to +158'F) |
| Humidity | Range for Rated Operation : 45% to 85% RH/Max
Ambient Operating Humidity : 35% To 85 %RH |
| OTHERS | Accessories | Operator's Manual :1 Spara fuse : 1 |
| Supplied | Power cord : 1 Test Probe(option) : 2 |
